Ford Powerstroke Diesel Forum

Ford Powerstroke Diesel Forum (https://www.powerstroke.org/forum/)
-   6.0 Motor problems (https://www.powerstroke.org/forum/6-0-motor-problems/)
-   -   2003 F250 6L no start - stumped (https://www.powerstroke.org/forum/6-0-motor-problems/1368671-2003-f250-6l-no-start-stumped.html)

Theotilus 09-10-2019 07:09 PM

2003 F250 6L no start - stumped
 
As I pulled into my driveway my truck started missing. I shut it down then tried to restart it - no luck.
Put the truck on my lap top with forscan. The readings while cranking were: FICM in sync , FICM voltage 46.5 to 47.5, IPR% 50.3, IPR pressure (assume this is HPOP pressure) 1557 psi, fuel pressure 55 psi. What do I look for next????

bismic 09-11-2019 02:28 AM

Post ICP voltage for KOEO and when cranking. Also, post the cranking rpms.

Theotilus 09-11-2019 03:18 AM

ICP voltage KOEO .25 KOER 1.79
Cranking RPM sorry I didn't record it but it was turning over at a very high rate. As fast as the starter
Could go with the batteries charged up.

Hydro 09-11-2019 05:04 AM

Bubbles in the fuel bowl?

ChrisSki 09-11-2019 10:38 AM

Can also "run out of diesel" at a quarter tank because of a bad fuel pick up.


All times are GMT -8. The time now is 03:15 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vB.Sponsors
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome