ok im still trying to get the hang of posting on this site, sorry. Im posting here because i figure its as good a start as anywhere i can see. I replaced my front ball joints on my 1995 7.3 diesel and am attempting to put the rotors back on. I had a heck of a time getting them off and i can't find any diagrams that have what i have. Instead of the 2 nuts with the lock washers, or that spring nut they show on some, i had 1 large nut and a c-clip with a little leg that came off it and went into a slot on the spindle. Now when i go to put the clip back in it doesn't seem to snap back in at all. and im unsure which order the splined washer and regular washer go on after that. It originally had auto hubs on it if that makes a difference. Any help would be appreciated.