Please Visit our Site Sponsors
|
Please Visit our Site Sponsors
|
 |
|
 |
 |
|
|
|
||||||||
| Towing, Hauling & Diesel Competition Discussion of Powerstroke Usage EG. Towing & Hauling Habits, Off Roading , Diesel Drags, Sled Pulls, ect... |
 |
|
|
LinkBack | Thread Tools | Display Modes |
09-26-2011, 11:33 AM
|
|||
|
|||
|
Brake Controller harness plug?
Trying to install a cheap'o autozone brake controller in my early 99' F250. I was told there is a pre wired harness already under the dash and all I need was to buy the harness adapter kit and plug it right in.
The only two open plugs I see under the dash are a huge gray rectangle one and a smaller round one (pictures of both included). I also attached a pic of the controller's plug and what their "Ford adapter harness" converts it to. Anyone know what I'm missing or which plug is actually the "factory" plug for an aftermarket controller? Thanks  
|
| Sponsored Links | ||
Advertisement | ||
|
||
|
09-26-2011, 11:35 AM
|
|||
|
|||
|
It's back by the flasher relay with one of those plastic screw things that you just pry out. I couldn't find mine either I had to have the dude come out and show me. lol
If your looking from the seat forward it's going to be WAY over on the right. I can take a pic if you need it.
|
|
09-26-2011, 11:40 AM
|
|||
|
|||
|
That shows it.
|
|
09-26-2011, 11:46 AM
|
|||
|
|||
|
Sweet! Sure enough, it's hidden in plain sight! Thanks.
|
| Sponsored Links | |
Advertisement | |
|
| Tags |
| adapter plug, brake controller, harness |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
