f250 badges if anyone needs them

[navyeoseabee]

i bought these to replace the ones i goofed up on my truck but i put 1964 f-250 badges on my truck instead. i paid $18.00 with shipping so i will sell them for $15.00 shipped.

i will remove the used double sided tape off the back. one has one alinement post broke but will not effect anything.

send me a pm if you are interested. thanks arick

[Powerstroke_soldier]

Hey what did you use to clean all the black adhesive off with? I took one of mine off and had trouble getting that crap off.

[crew991]

They make a wheel that you put on a drill i have one you can get it at car quest.I took all the body moldings off mine an the glue stayed it took it right off.

[navyeoseabee]

you going to laugh but i found my black and decker heat gun would work.

i would heat it up untill a bit of it was bubbling then wiped it with a thick towel (thick because it was HOT!) it smeared a bit but once you get the majority off denatured alcohol woiuld clean the last little bit up.

if you soak a towel with denatured alcohol and press it to the tape it would turn it to gel then you can pick it off.

it took me 45 minutes per side...good music, cold beer, and a nice chair to sit on.

[Eric]

Originally Posted by navyeoseabee

you going to laugh but i found my black and decker heat gun would work.

i would heat it up untill a bit of it was bubbling then wiped it with a thick towel (thick because it was HOT!) it smeared a bit but once you get the majority off denatured alcohol woiuld clean the last little bit up.

if you soak a towel with denatured alcohol and press it to the tape it would turn it to gel then you can pick it off.

it took me 45 minutes per side...good music, cold beer, and a nice chair to sit on.

Those new badges look awesome They're different and different is good

[navyeoseabee]

if you use fishing line to slice through the tape it saves work too.

here are some pics after the clean up




i just removed the psd logo and you can see the gunk that was on the edges. this is where the denatured alcohol comes into play.

[crew991]

Wow those badges look good

[RRonning1984]

Originally Posted by navyeoseabee

if you use fishing line to slice through the tape it saves work too.

here are some pics after the clean up




i just removed the psd logo and you can see the gunk that was on the edges. this is where the denatured alcohol comes into play.

That old logo is so cool!

[navyeoseabee]

Originally Posted by crew991

Wow those badges look good

thanks guys, i thought i was going "out on a limb" when it was just an idea, but now i love them.

they are 1964-65 stock badges the body curve almost matches, there is a small gap at the top of the 250 part. if i did them again i would use some double sided tape along with the nuts that came with them.

[RRonning1984]

Originally Posted by navyeoseabee

thanks guys, i thought i was going "out on a limb" when it was just an idea, but now i love them.

they are 1964-65 stock badges the body curve almost matches, there is a small gap at the top of the 250 part. if i did them again i would use some double sided tape along with the nuts that came with them.

I really like it. If I find a set I may have to jump on them!