Clearing 37s on a 03 6.0

[Jgraser1]

Hey everyone im a little new to the truck thing and have a couple questions about suspension and tires.

I want to put 37s on my truck but im not 100% sure what it would take to make them fit.

I currently have 33s with no lift or leveling of any kind.

I have some 3 inch lift blocks and everything necessary to install them.

I know I will probably hear some bad things about using blocks to lift my truck and im well aware of the risks and things involved with them.

I guess what im trying to figure out is, will I be able to clear 37s with just a 3 inch lift

[Koda22]

They might fit but they are gonna rub...seen a few people run them on 4inch lift but rubbed...most will say at least 6 inch for no rubbing, and that's gonna take the correct backspacing/offset

[Jgraser1]

Cool thanks for the advice, looks like ill stick with 35s for now

[shawnb99]

the pic is a 37 with 3.5" lift. the wheel is 9" wide with -6mm offset....4.75 bs. very minimal rub while street driving

[Koda22]

Wow who's truck is that? I'd like to know how to get 3.5inch of lift

[shawnb99]

shackle hanger kit for the front.

truck belongs to RAY BENNETT ....screen name on here.

[Jgraser1]

so maybe ill have to do a little clearancing but for the most part itll be fairly doable with a 3 inch lift, thanks for the help and the picture

[99Superduty78]

Originally Posted by shawnb99

the pic is a 37 with 3.5" lift. the wheel is 9" wide with -6mm offset....4.75 bs. very minimal rub while street driving

Do you know how wide his 37s are? I PM him about clearance but he didn't respond.

[shawnb99]

give him a day or so....i believe they were a 12.50

[at0075]

I made 3.5 blocks for the front of my truck with no lift in the rear. 35 rubbed a hair on a hard turn. I rounded off the plastic on the bottom on the bumper. Your def gonna have to do some plastic shaving or lift higher