![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| Suspension & Steering Discuss OEM & aftermarket suspension, lifts, air ride suspension, shocks, steering components, etc. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
7" and less lift pictures
Ok many people always ask for pictures of a truck with such and such lift with some wheel and tire combination. So to make this easier I am going to start a thread that will contain all various lift, wheel, and tire combinations. Lets See Them!!!!!!!!
Rules - Post a picture of your truck - Include Lift Kit Brand - size of lift - Include Wheel and Tire combination |
| Sponsored Links | ||
Advertisement | ||
|
|||
![]() ![]() 6" Rough Country 4-link SS-M16 37/13.50/20 XD Monster 20x10 |
|
|||
![]() ![]() 6" Fabtech Lift 37 x 12.5 x 37 BFG KM2 Stock Rims W/2" spacers |
|
|||
|
-6" lift
-18x9 Rockstars 38x12.50 Nitto Mud Grapplers -2" wheel spacers all around ![]()
|
|
|||
![]() ![]() ![]() 7" Icon/Donahoe 18x9.5 American Racing Chamber 37x13.50-18 Toyo MT |
|
|||
![]() ![]() ![]()
|
|
|||
|
Any leveled trucks on 35's or the occasional 37" tuck
|
|
|||
|
im rockin some worn out 35" nittos on just a 2.8" leveling kit
bought a 5.5" fabtech for it! |
|
|||
|
Not the newest pictures of the truck and it's updates, but this will do, since the lift/wheels/tires haven't changed.
![]() ![]() ![]() -2.5" Add-A-Leaf -18" x 9" XD Badlands -325/60/18 (33" x 13") Nitto Terra Grapplers |
|
|||
|
Here is my before (day I brought it home):
![]() How it sits now: ![]() And there were a few stops in between 2.5" leveling kit and F350 rear block that came on the truck and factory 275/70/18's: ![]() ICON 4.5" with ICON 5" rear leafs and 35x13.50x18 Mickey Thompson ATZ's on 18x9 KMC Monsters ![]() Same as above except I added 1" TEI spacer to the front and 1" block to the rear: ![]() ICON 7" and also added the 4-link, went up to 20x10 KMC Monsters with 37x13.50 Kumho KL71's ![]() And finally the last stop as far as lifting went, I added the 1" TEI spacer to the front (8" total) and did the PMF 08 Leaf spring conversion with 10" PMF traction block in the rear: ![]() Oh wait I forgot, when all that came off I went to 1" TEI spacer on the factory coil on the front and a 3.5" PMF rear block factory Harley wheels and 275/65/20's Terra Grapplers:
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|