clicking/binding while turning right

[Riley126]

progressivley getting worse, while turning my truck to make a right turn, it sounds as if there is a clicking/binding sound. also when i first put the truck in drive and it starts to take off occasinally there is a clunk , sounds like it's coming from underneath the cab. any ideas?

[Riley126]

bump...............

[Riley126]

Checked all u-joints, Ball joints and tie rods don't seem to have major play and the links are new.

[hypersnyper694788]

This may sound dumb but did you check to make sure that your hubs are not locked

[Tyler]

Hubs can stay locked, and shouldn't bind. Truck will only bind when its in 4WD. Its they are locked, you may here UJoints clicking though

[hypersnyper694788]

Mine were locked with out being in 4x4 and when i would make u-turns it would make a donk donk donk noise.

[merc123]

With mine locked but not in 4WD mine make noise too and will still try to bind up sharp turns. This is with a brand new dynatrac free spin kit too.