My truck is newer so i dont know the diff... but i have a 6" lift and my 37's rubbed pretty bad. i had my wheel wells cut under the trim and moved it all back about 1 1/2". they clear fine now and i cant even see where they did the work for $350! With a 4" lift idk?
nope... unless you do cut out fenders... they will fit pretty decent on a 6" lift but still rub a tad.... i had 37's on a 8" lift and they still rubbed on the leafs...
The problem is they're about an hour and a half away from where I live, and are only open during the hours I work...maybe they'll still have them on Saturday.
37 on a 4 inch lift is a bad choice, thats not smart, i have a 10in lift and 39.5x15 and i have hit my fender while wheeling. I also know someone who has a 99 sd 7.3 with a 6in and 37 and they do fit but its tight. So before you go and by them think about it. I wouldnt if I was you i would put 35s on
my cousin put a 4 in lift on his truck and he had 37s but if you hit a good size bump they hit and he could barley turn so i wouldn't do it
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Powerstroke Diesel Forum
5.4M posts
265.8K members
Since 2005
A forum community dedicated to Ford F-series owners and enthusiasts with a Power Stroke diesel engine. Come join the discussion about performance, bulletproofing, modifications, classifieds, troubleshooting, maintenance, and more!