|
Anyone running the new Carli Trackbar yet?
Just curious if anyone has tried it yet:
Ford Super Duty Adjustable Track Bar, Pan Rod Bar
From their website:
Shown below is the Ford Track Bar Tapered Rod End sitting on my desk illustrating the key design improvement. This connects to the axle through a ball joint that faces straight down. In the photo below, the taper that marries up to the ball joint pin is vertical and the rod end points up, towards the Track Bar Bracket. This means that when your axle is at full droop, it isn't cranking on that ball joint pin.
On the other end of the Track Bar is a threaded bung with a Heim Joint. So far we have a few of these running around Orange County and the owner's response was a "night and day" improvement. We're confident that this is exactly what Carli customers should expect.
Last edited by TxFireman1972; 07-06-2010 at 06:37 PM.
|
07-06-2010, 06:34 PM
Linear Mode
