F250 axle swap dana 60 (problem)

cubid1997 · #1 (**permalink**) 04-11-2010, 05:23 PM

Hey guys i got a 1997 F250 power stroke that had the dana 50 TTB front axle in it and i am going ahead and putting the f350 dana 60 in there. The front Axle i got has king pins and came out of a early 86-early 90's .. the problem i am experiencing is my brake calipers off of the dana 50 has 2 bolts and now i noticed tonight the dana 60 has triangles on the top and bottom that hold the caliper down.. so tonight i went ahead and put my 4x4 rotors and hubs on the dana 60 .. so do i have to get new brake calipers and when i get those calipers will my hubs and rotors still be able to work with the new calipers?

cubid1997 · #2 (**permalink**) 04-13-2010, 12:02 PM

CAN ANYONE HELP ME!!?

KeepinItFord · #3 (**permalink**) 04-13-2010, 12:03 PM

hmmmm, heres a free bump for you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement