![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| Suspension & Steering Discuss OEM & aftermarket suspension, lifts, air ride suspension, shocks, steering components, etc. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
leveling kit and shackles
wondering if u can run a leveling kit on the front with the lifted shackles also. haven't done it just seeing if it is possible.
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
You'd want to run a hanger and shackle, but yes you can run say a 2" mini spring back with a 4.5" hanger and shackle to make a 6.5" lift.
Of course you need a few other parts to address steering issues for that height to have it properly setup. |
|
|||
|
i was thinking abot usine a leveling kit and shackles on the front with some 2" block in rear. what else would be needed for the steering to aligned properly???
|
|
|||
|
4" total lift?
You'd need a front box kit out of a 4" lift.....pitman arm, trac bar bracket, sway bar links, etc.. Shocks meant for a 4" lift, bumstop spacers or larger bumpstops. |
|
|||
|
thanks for the info. gonna stick with a leveling kit and if the front sits a little higher just use some 1" blocks in rear so it dont have that bulldog stance.
|
|
|||
|
Don't stack blocks get a taller one.
|
|
|||
|
thanks for the info!!!
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|