Weld Rims

jmiller3104 · #1 (**permalink**) 06-19-2008, 03:50 PM

hey everyone. i tried this once and im going to try again for maybe better luck. I am looking for 16.5x12 Weld racing rims. either the stone crushers or super singles or if you have any weld rims that are at least 12 wide or if you got a 14 wide rim i would really love to see it. needs to be 8x170 bolt pattern. if you know anyone that has some and dont want to sell them. make them.

jmiller3104 · #2 (**permalink**) 06-20-2008, 03:29 PM

not even a reply

jmiller3104 · #3 (**permalink**) 06-22-2008, 07:40 PM

does anyone know a place you can even find those rims anymore? any help would be appreciated.

RC51 · #4 (**permalink**) 06-22-2008, 07:48 PM

Call Weld. But you are better off going to 16, 17, 18, 19, 20.

RC51 · #5 (**permalink**) 06-22-2008, 07:50 PM

BTW what part of SA and do you 4wheel you truck?

**Patrick** · #6 (**permalink**) 06-22-2008, 07:51 PM

16 wont fit a superduty if thats what you want them for.

RC51 · #7 (**permalink**) 06-22-2008, 07:54 PM

Sorry I don't have a SD w/18's any more [00] EX has it [dam hot]

**Patrick** · #8 (**permalink**) 06-22-2008, 08:00 PM

I have Dick Cepek DC-1 polished 18X12 8 on 170mm

I also have Mountain crushers 17X10 8 on 170mm

but dont see anything in our system that would be real heavy.

***toddy*** · #9 (**permalink**) 06-22-2008, 08:13 PM

Quote:

Originally Posted by Patrick

16 wont fit a superduty if thats what you want them for.

16 is the factory size for a 99-2003 superduty.

**Patrick** · #10 (**permalink**) 06-22-2008, 08:15 PM

your right, I'm thinking 05 and up. I think the rotors are bigger, and you have to run a 16.5 on them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode