Black Majic Light install!!

**Raul@Stealth Automotive** · #1 (**permalink**) 07-09-2008, 07:46 PM

Well it took me around 4 hours but i got all the wiring done and hooked up the 4 Hella Black majic lights to the front of my roof rack....here is what i used:

you will also need a end piece of a drill bit were the wire feeds through like this:

well i drilled a 7/8th whole on the top.. then i installed the gromet with some silicoln sealent:

next from the bottom up i inserted the drill end piece and before i pushed it all the way through i applied some sealent to the bottom... so that when i pulled it all the way up it would seal all the way around.... i have to say that this worked out perfectly....

next i routed all the wires... this was a PITA... i used around 200 feet of 16g wires... here are some pics on how i routed it through the head liner:

after this i went and sat on top of the rack and started to get the lights ready to install...

once all that was done... i tried them out and made sure everything worked correctly before i started to finalize the install... here is a finished pic of the rack with the wires hidden:

and some pics of the lights:

let me know what you think... i really like the look of them.... i ran out of light before i could do the rear lights but ill have to do that sometime later because it was a PITA

-Raul