Join Date: Aug 2008
Location: Tucson, AZ
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Thanked 4 Times in 4 Posts
Feedback Score: 0 reviews
Ok, I got some time to figure out pricing and give you guys more details about them. Here are the 3 versions and specs:
Stage 1- 1.5" DOM .250 wall tubing, poly joint on the axle side and Ballistic 2.63" uniball frame side, 7/8" threads on joints, weldon axle and frame mounts, estimated hp rating 400 or less, $475
Stage 2- 1.75" DOM .250 wall tubing, poly joint on axle side and Ballistic 2.63" uniball on frame side, 1" threads on joints, weldon axle and frame mounts, estimated hp rating 550 or less, $525
Stage 3- 2" DOM .250 wall tubing, poly joint on axle side and Ballistic 3.0" uniball on frame side, 1.25" threads on joints, weldon axle and frame mounts, estimated hp rating 750 or less, $600
All kits will come standard with a raw finish. Powdercoating is optional and would run $75 per kit for black textured. Other colors available prices will vary. All jam nuts and hardware is included with every kit. Bolt on frame mounts add $25, bolt on axle mounts add $25, integrated block kit add $150 plus $10 per inch of block size (2"-10" available in 1/2" increments).
This is introductory pricing and subject to changes. Hp ratings are estimates only and we hold no liability should a failure occur.
We are always open to opinions and ideas on how to better suit our products to your needs. If you see something I have missed or something you guys would like to see thats not listed, just let us know!
Last edited by NotStock; 04-07-2012 at 04:24 PM.