Ford Powerstroke Diesel Forum banner

bulletproofing 101

2K views 1 reply 2 participants last post by  Johnsonmotorworks 
#1 · (Edited)
well first i just wanna say I'm new to the site and new to a 6.0 and i appreciate any help i can get. recently had my powerstroke looked at and after some diagnostic we have come to find out I'm down 2 injectors number 4 and 5. and also i have the typical milky residue on the coolant bottle so instead of sticking a bandaid where i need stitches I'm bitting the bullet and bulletproofing my truck. so with all yalls help i was wondering do they make a reasonable priced kit that includes everything including the egr upgrade and injectors or egr delete and injectors either one will work id prefer the upgraded egr tho.. thanks in advance from a 6.0 rookie
 
#2 ·
I am currently replaceing the head gasket and upgrading somethings. I did about a month of research on this forum on what to do and not do. Then went to multiple websites comparing prices. If you go to the 6.0L Problems forum and post this there I think you will have better luck. I can tell you ive noticed that kits are over priced.

When I ordered parts I want to
Here

Some Write ups I found useful
http://www.powerstroke.org/forum/general-6-0l-discussion/204386-write-up-bullet-proofing-6-0l-psd.html

This one I found the most useful! parts list with part numbers. I punched them into the autonation website I list above and they have the cheapest prices!

http://www.powerstroke.org/forum/general-6-0l-discussion/279906-6-0-head-stud-part-list.html
I ordered ARP head studs and coolant filter from XDP and use Diesel10 for 10% off and free shipping.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top