|
05 grizz
has anyone had any problems with there grizzly rearends/axle's? i have a tire in the rear that doens't want to spin. the cv boot is not all twisted, plus it feels fine (rotates and stays together, after i took it out). splines are ok on both ends. not sure if the housing on tire that spins broke away from the spool or what. but if anyone has any ideas let me know. otherwise going to have to tear apart each cv joint and the rear end. and it looks like getting the diff out of my 4wheeler is going to be a pain in the a$$. thing is i wasn't beating on it, just putting around and noticed that one tire was spinning in mud and the other wasn't. the top cv joint and axle didn't look like it lined up right when i got down and looked at it, but the boot wasn't all twisted around, like it should be if it's the cv joint. put axle back in to see if i could hold it while i spun the other tire, not happening. spun out of my hand. so not sure what to make of it. heard some thud/grinding/clanking noises when the other tire was spinning. any ideas, left me know. she has 27" tires aired up to 29", clutch kit, k&n airfilter and wrap, jet kit, and different exhaust. sorry so lonog, just wanted to cover all the bases. thanks
|
03-28-2007, 10:34 PM
Linear Mode
