Biodiesel retailers?

[Sabre2th]

Anybody know of any biodiesel retailers in the Springfield area?
Tom

[Dave]

Springfield where? but this might help

Biodiesel.org - Retail Fueling Sites

[Sabre2th]

Springfield, MO
Shame there's nothing close. Personally, I hope the bill passes to require at least B5 at all pumps in 2009....
Tom

[Sader]

I know this is an older post. But what a shame there isn't more bio-d available in the STL area either. If it is, it is damn hard to find.
A friend and I are going to ramp up our production to take care of both of our 2005 PSD's with no more #2 at all. Once that is complete and going well, we plan to go bigger and retail it to the locals.

[silverF250]

I am interested in what you have as a setup and what you are using for fuel.

[greenie]

Thanks for the info.

[Sader]

Originally Posted by silverF250

I am interested in what you have as a setup and what you are using for fuel.

We are putting together a setup which should enhance our productivity. Single tank, mixer, inline heater, pumps, etc. Pretty much what you see on the internet. Our previous setup was, unorganized and haphazard. Took too much time in a cluttered garage. Although the results were decent and the truck ate that fuel fine. We use WVO.

[silverF250]

Where are you finding enough WVO? What are you getting in miles-gallon? When you are fully setup I wouldn't mind taking a look at it on some weekend.

[Sader]

We have not had enough to run B100 yet. I have not had any luck with useable wvo here. I had a quality source(60gal/month) that went away. But, my partner feels he has enough sources to fill the order.
Too many other things going on to prevent any real quality time on it lately, hence the delay. In addition to work and family time, we have also been involved with construction of my partners new house.
Our goal is to be online by the end of April. Using magnesol will take a bit of trial and error. But I hear it is the way to go.

[silverF250]

That sounds pretty cool I am just starting to do my research and figured if you have already done it I would use you as a reference. If you don't mind what was your guys buy in to get the processor and which one do you have? This really appears to be the way to go with the high cost of fuel, and since my dad and brother have 7.3 it might be worth doing. It would probably be late summer before I would get a processor there are just to many questions I need answers too.