Ford Powerstroke Diesel Forum - View Profile: OCVeloMan

OCVeloMan OCVeloMan is offline

Powerstroke.org Sponsor

  Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. Ironmerganser
    03-01-2017 05:53 AM - permalink
    Ironmerganser
    So I am really torn between the BDS 2.5" coil over conversion w/ radius arms or the Carli Backcountry 2.5". I would like to stick around that $3000 to $3500 mark max.

    I have a 2015 F250 CC 4x4 KR. Total stock with 15k on the clock. Truck is used mostly for daily driver and for hunting trips. I pull an 18 ft enclosed trailer on a few hunting trips a year...but don't pull anything really heavy. Mostly a glorified dog taxi. I just want to run 35" tires with either 18 or 20 inch rims.

    Or....do I piece together a system?

    Any input would be GREATLY appreciated. Thanks in advance!!!
  2. BigGreen06
    09-14-2016 08:50 AM - permalink
    BigGreen06
    I think I am going to stick with the 20's and get the E rated tires. Is it a real big deal for fitment, or is it more of a ride quality issue?
  3. Ford#2oil
    08-02-2016 08:02 PM - permalink
    Ford#2oil
    Thanks for your help in answering some of the questions I had. I have my 2.5" backcountry lift on as of today and am loving it! Could you recommend a specific airbag kit that will work with my lift and the full leaf replacement in the rear? I had ordered the Air Lift Load Lifter 5000 and the guys are saying it will not work with my full leaf replacement in the rear.
  4. 6four600
    12-16-2015 04:55 PM - permalink
    6four600
    Question about my 08 f250 with 4" bds lift. So I am wanting to buy the Carli backcountry 2.0 but can't justify spending $5000 with full leaf spring rear...So here is my question, can't I just buy the 4.5" coil springs they sell, the backcountry 2.0 reservoir shocks for all 4 corners and the leaf spring upgrade and get a MUCH better ride? I already have the adjustable track bar from my 4" lift, I already have the bds radius arm drop brackets...The only other thing I may need that I see is the sway bar end links, drive shaft drop bracket and stainless lines....According to carlis website I could get everything for about $1500 less this way...What is your take...
  5. cajun_driller
    08-14-2015 01:30 PM - permalink
    cajun_driller
    I have the 4.5" Back Country on a 2012 F-250. Looking at tire and wheel options. Considering the Ballistic Jester 18x9 wheels with Kuhmo Road Venture KL78 tire, 355/65R18. According to their websites, the wheel is available with a +12 offset/5.5" backspace, or a -12 offset/4.5" backspace and the tire is 36.5" x 14.1". Do you think this will fir my truck, and which offset/backspace should I go with? You have experience or knowledge regarding the Kuhmo tire? I have procomp MTs now and they are super loud so looking for an AT tire but trying not to spend a fortune.
    Thanks in advance,
    John
  6. Daphsdad
    07-20-2015 05:25 PM - permalink
    Daphsdad
    i was wanting information on a carli leveling kit... i plan on keeping the stock rims
  7. WanderingShaman
    03-29-2015 10:25 PM - permalink
    WanderingShaman
    I'm considering doing the IPR relocation kit. How has it been working for you? Any feedback would be greatly appreciated. Thanks!
  8. BigRedF250FX4
    03-02-2013 06:13 PM - permalink
    BigRedF250FX4
    Hello, was wondering if you are still running the IPR oil relocation and coolant filter and how/where you hooked up the coolant from? Tee'd into heater hose or ?

    Your info would be appreciated.
  9. Amerrill117
    01-03-2013 05:06 PM - permalink
    Amerrill117
    What is the name of the package that you are talking about?

  About Me

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Yesterday 02:00 PM
  • Join Date: 08-04-2010
  • Referrals: 1

  Friends

Showing Friends 1 to 4 of 4
  • bgraiders323
    • bgraiders323 is offline
  • ducj5150
    • ducj5150 is offline
  • Mannysouza
    • Mannysouza is offline
  • WEmeigh
    • WEmeigh is offline

  Garage

    2006 Ford F250
    Dan-O-Lantern

  Mentions

05-25-2017
05:15 AM - Heavy_GD mentioned OCVeloMan in post Lifting My Truck
...d.html Skyd Ram OCVeloMan
05-24-2017
07:26 AM - Heavy_GD mentioned OCVeloMan in post Fox Shocks vs OEM. Are they worth it?
...n. What ya think OCVeloMan ?
05-17-2017
07:18 AM - DJM7.3 mentioned OCVeloMan in post SoCal guys w/Carli Commuter 2.5" Lift
OCVeloMan - Thanks for the hon...
05-15-2017
01:32 PM - Skyd Ram mentioned OCVeloMan in post SoCal guys w/Carli Commuter 2.5" Lift
...he Backcountry kit. OCVeloMan can probably elabora...
03-15-2017
08:17 AM - Justinlw mentioned OCVeloMan in post Carli Suspension - Official Thread
OCVeloMan I saw you guys menti...
03-01-2017
07:53 AM - Ironmerganser mentioned OCVeloMan in post Newbie first post - BDS or Carli - torn
...ossing off the BDS. OCVeloMan can you PM me and le...
04:12 AM - Heavy_GD mentioned OCVeloMan in post Newbie first post - BDS or Carli - torn
OCVeloMan .....
04:08 AM - Heavy_GD mentioned OCVeloMan in post
02-07-2017
01:09 PM - ZMANN mentioned OCVeloMan in post Tube adapter ID ??
OCVeloMan or anyone d...
01-13-2017
09:26 AM - wesjtx mentioned OCVeloMan in post Carli Suspension - Official Thread
... up today. Thanks OCVeloMan Trussed front axle ...
12-09-2016
09:24 AM - OCVeloMan mentioned wesjtx in post Carli Suspension - Official Thread
wesjtx getting setup the ri...
12-06-2016
07:44 AM - OCVeloMan mentioned imation in post Another Lift Thread
...prings (same kit as imation) would suit you perf...
11-21-2016
09:32 AM - OCVeloMan mentioned wesjtx in post Carli Suspension - Official Thread
...it. That means you, wesjtx! http://i.imgur.c...
11-18-2016
11:43 AM - JetExpress_6.7 mentioned OCVeloMan in post Carli Suspension - Official Thread
...iscussed before and OCVeloMan commented on it with...
11-02-2016
05:10 PM - mhatlen mentioned OCVeloMan in post What is the best lift system
OCVeloMan is the one you want ...
10-24-2016
11:18 AM - charbaugh mentioned OCVeloMan in post Track Bar Ball Joint Keeps Failing After Lift
OCVeloMan, I think you're conf...
10-19-2016
12:51 PM - wesjtx mentioned OCVeloMan in post Carli Suspension - Official Thread
OCVeloMan is there any hope fo...
09-06-2016
08:04 AM - nighthawk285 mentioned OCVeloMan in post Baja Designs OnX6-Hi Power 10" Review
...t off, it's Dan's OCVeloMan fault that I wanted ...
08-15-2016
05:31 PM - nighthawk285 mentioned OCVeloMan in post 6.0 Chat Thread
... too, Wes; username OCVeloMan....he's our site Car...
07-12-2016
11:58 AM - OCVeloMan mentioned Balla6.7 in post Carli Backcountry 2.0 Leveling Kit
...pension section. Balla6.7 Just finished a 2.5"...

  Quotes

05-19-2017
07:09 AM - OCVeloMan quoted OH IT'S KINO in post Carli Suspension - Official Thread
My truck is in the alignment shop...
07:09 AM - OCVeloMan quoted 2civicrr in post Carli Suspension - Official Thread
My truck is in the alignment ...
05-17-2017
04:59 PM - mhatlen quoted OCVeloMan in post SoCal guys w/Carli Commuter 2.5" Lift
Gloves are off, man! :haha: Ye...
03:40 PM - OCVeloMan quoted mhatlen in post SoCal guys w/Carli Commuter 2.5" Lift
Your not far from Dan...the ...
05-15-2017
03:40 PM - OCVeloMan quoted DJM7.3 in post SoCal guys w/Carli Commuter 2.5" Lift
I am in Fontana. So right u...
02:32 PM - DJM7.3 quoted OCVeloMan in post SoCal guys w/Carli Commuter 2.5" Lift
The Commuter is one of the bes...
01:44 PM - OCVeloMan quoted DJM7.3 in post SoCal guys w/Carli Commuter 2.5" Lift
I'm considering the Commute...
05-08-2017
02:48 PM - OCVeloMan quoted OH IT'S KINO in post Dan-O-Lantern V2 - Build Thread!
Lovin' the look and progress of t...
06:55 AM - OCVeloMan quoted Nimrodical in post Carli Suspension - Official Thread
Does anyone know when the Carli...
05-07-2017
08:05 PM - 08LDO6120 quoted OCVeloMan in post Carli Track bar issue.
Correct, my point was to say t...
05-05-2017
02:36 PM - OCVeloMan quoted OH IT'S KINO in post Carli Suspension - Official Thread
Exactly how badly would I rub wit...
12:25 PM - OH IT'S KINO quoted OCVeloMan in post Carli Suspension - Official Thread
The biggest 35 will rub, stick...
05-03-2017
01:46 PM - OCVeloMan quoted OH IT'S KINO in post Carli Suspension - Official Thread
I don't want to hijack this threa...
05-01-2017
03:00 PM - OCVeloMan quoted scbeanx in post Carli Suspension - Official Thread
Thanks for the quick reply O...
01:02 PM - OCVeloMan quoted scbeanx in post Carli Suspension - Official Thread
Looking to purchase the Carl...
04-20-2017
06:57 PM - PyroTekRob quoted OCVeloMan in post Zone/RC Ready Lift
None of our kits have ever see...
04:44 PM - 2civicrr quoted OCVeloMan in post Carli Suspension - Official Thread
Not sure on U-Bolt length or c...
09:02 AM - OCVeloMan quoted MadeInDade in post Carli 2017+ Super Duty Suspension Systems
Can this setup be run on a 6.2L...
08:59 AM - OCVeloMan quoted CUSTOMWHEELS4U in post 20x9 ???
Less sidewall always leaves you mor...
08:57 AM - OCVeloMan quoted 2civicrr in post Carli Suspension - Official Thread
I have a 2015 F350 4WD. I'm ...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
2
100.0%
Members who left positive:
Members who left negative:
2
0
Total positive feedback: 2
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome