Ford Powerstroke Diesel Forum - View Profile: Jeremy@NoLimit

Jeremy@NoLimit Jeremy@NoLimit is offline

Premium Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 31
  1. heybusaman
    Today 08:01 AM - permalink
    I have been going through trying to find a solution to my dilemma. My turbo went out this week and I have been looking at alternatives for which way to go. I have a 2012 F 250 6.7. I'm leaning on the StreetMaxR 65.5. This is almost something I have to put on hold because of funds. I just put 45 hundred in one of my bikes and the turbo wasn't suppose to break yet. lol Seems whatever I do as far as which turbo I'm gonna go with they all seem to be around the same money. This will be my first time going into the motor, besides the delete and EGR upgrades. I have did a couple 6.0 motors with success. So what am I looking at as far as what I will need to complete the job. StreetMaxR 65.5, pedestal, and hardware to do the install. I did notice on the diesel authority that they do financing is that part of you ? If I did that I would probably go with the piping also. The truck is a daily driver. Any help would be most appreciated.
    Thanks, Denny
  2. nslumang
    02-23-2017 01:02 PM - permalink
    Hello Justin,

    I was recommended by someone on this forum to contact you about some work I want to be done on my 2008 Ford 6.4. It is a daily driver and only tow an 18 ft. boat on the weekends. Recently, I had a wrench light turn on and pulled the code P012F from it. I have decided to pursue the DPF/CAT/EGR full delete.
    This is my current product selection:

    H&S Mini Maxx: $749
    Flo-Pro DPF/CAT Delete Pipe Stainless Steel: $215
    S&B Cold Air Intake Dry: $289
    Mini Maxx Dash Mount: $64

    The shop I am planning on going to quoted me an install price of these products plus an oil cooler for $1800.

    This would bring the grand total to about $3117 before taxes.

    I do want to change the radiators and other things and am looking for the best combination to fit my needs. My budget is roughly $3800-$4000

    For example, DPF-R tuner would allow me to afford the Mishimoto Radiators.

    Any suggestions? Thank you.
  3. Downtown109
    01-29-2017 02:08 PM - permalink
    Hey Jeremy,
    I have a question that maybe you can answer for me. I have a H&S mini maxx from 2012. I had it on a 2010 powerstroke, I uninstalled it after I totaled that truck, I now have a 2013 Powerstroke I am trying to install it on to do a full delete. Problem is that it will not let me select powerstrokes for 13-14 but I can select duramax and cummins. I have been told I need to update the firmware, but wouldn't that make it not as good as it is now? performance wise. Also I have thought about selling it and just get a sctx4 or livewire. Can you guide me in the right direction?
  4. Mckinney
    01-23-2017 11:26 AM - permalink
    Hello Jeremy,

    I see you and your products are held in high regard so I wanted to ask you about a cold air intake.

    I have a 2015 F-250 6.7 diesel.
    My dealer I purchased the truck new from last year said they would void warranty for just about anything including a cold air intake. I hear that yours would not void it though? I can't mess with deletes right now because I have to do emission here where i live.
    I am hoping to get a little better MPG out of the truck and its completely stock and has no computer add ons or re-programmed.

    1. Do you have a stage 1 intake that would help and not throw codes if I put it on the truck and is it worth it? I know there is a lot of talk about how cold air intakes don't increase power or MPG. Although I have done this to most of my vehicles and it normally does sound better :-)
    Thank you for your help!!
  5. salnazzaro
    01-07-2017 01:34 PM - permalink
    Hey Jeremy my aunts boyfriend just bought a 2015 dodge 3500 w a Cummings and he was asking me about a dpf delete and tune for it and I don't really know anything about dodges and tuning for them so hence why I'm contacting you! He's ready to buy a tuner and exhaust for it now lol. I tried calling sales but no answer. Can you help me please. Thank you.
  6. Sanders_89
    12-21-2016 10:20 AM - permalink
    What is No Limits IG name? Trying to see the EGR delete picture you told me about this afternoon.
  7. ducpilot
    12-14-2016 05:55 PM - permalink
    Hi Jeremy, My name is Don. I've got a 2009 f350 drw standard cab and chassis fitted with a wrecker body. I only use it to tow small cars, however, its used mostly as a escort truck for our trucking division. I am looking to delete my CAT & DPF as my dealer is saying they were probably contaminated when I lost my HPFP last month. Id like a pipe with bungs for the sensors, and a monitor/tune with a safe tune. thanks Don 808-306-1650
  8. BigGreen06
    11-26-2016 06:36 PM - permalink
    You have any good cyber monday deals?
  9. 760jimmy
    11-22-2016 05:27 AM - permalink
    I have a SCT X4 tuner that was on my 2015 Mustang GT. Is it possible to use that tuner on my 2014 f350 to delete it? Can those correct tunes be downloaded to it?
  10. RamAirfreak98ss
    11-11-2016 11:14 AM - permalink
    Hi Jeremy,

    I have a 2014 F550, it only has 9k miles on it now. Iíve had it deleted/tuned with this tuner since 1000 miles old.

    About 800miles ago/August 2016, it threw these two codes when I took the truck on vacation.

    I recently saw online, others have had these same couple codes on deleted trucks, usually because the tuner doesnít recognize something to disable?

    The truck ONLY runs in reduced power mode, but MAF sensor has to be unplugged, if I plug it back in, the truck only idles, nearly no response to throttle pedal and wonít move out of its spot.

    They said Torque Tech went out of business already, been trying to figure out how to contact them for a couple months now.

    Is this something I can clear up with another tuner or no use using the t1 if this happens?

  About Me

  • About Jeremy@NoLimit
    Exact Location
    Athens, Ga
    1/8 Mile ET
    1/8 Mile MPH
    1/4 Mile ET
    1/4 Mile MPH
  • Signature
    Owner- The Diesel Authority
    Instagram- @thedieselauthority

    2017 event info!!!!

    2015 6.7 Platinum
    Lots of NL stuff
    H&S 369SXE
    Spartan tuning

    2006 Shorty in progress
    Lots of fuel, turba and NL stuff


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 02-23-2017 04:27 AM
  • Join Date: 02-20-2010
  • Referrals: 1


Showing Friends 1 to 10 of 17
  • Bdwill
    • Bdwill is offline
  • bigrpowr
    • bigrpowr is offline
  • Chatham036
    • Chatham036 is offline
  • Corey@CNCFAB
    • Corey@CNCFAB is offline
  • EK!
    • EK!
    • Serving Our Country!
    • EK! is offline
  • Heavy_GD
    • Heavy_GD is offline
  • jallison096.4
    • jallison096.4 is offline
  • LFDPVinny
    • LFDPVinny is offline
  • LFDPZach
    • LFDPZach is offline
  • ODAWG714
    • ODAWG714 is offline


11:36 AM - JustinOOO9 mentioned Jeremy@NoLimit in post Got the Green Light for Upgrades
send a pm to Jeremy@NoLimit he should be able to...
05:59 AM - Heavy_GD mentioned Jeremy@NoLimit in post No Limit and Gearhead Issues
Update your sig Jeremy@NoLimit.
05:53 AM - Heavy_GD mentioned Jeremy@NoLimit in post DEF delete 2012
...remy- No Limit Fab Orders-1 ...
08:57 PM - heleonardman mentioned Jeremy@NoLimit in post DEF delete 2012
.... Again, contact Jeremy@NoLimit for the best parts a...
08:51 PM - heleonardman mentioned Jeremy@NoLimit in post DEF delete 2012
...ction. Then contact Jeremy@NoLimit to hook you up with ...
10:54 PM - heleonardman mentioned Jeremy@NoLimit in post First Powerstroke
05:12 AM - Heavy_GD mentioned Jeremy@NoLimit in post Livewire TS Install
Paging Jeremy@NoLimit
05:05 AM - Heavy_GD mentioned Jeremy@NoLimit in post spartan problem
Jeremy@NoLimit ??
10:14 AM - Heavy_GD mentioned Jeremy@NoLimit in post Tyrant tunes & Cale
...rant-diesel.html Jeremy@NoLimit
06:24 AM - Heavy_GD mentioned Jeremy@NoLimit in post Trouble with ppei/ ez lynk
06:33 AM - Heavy_GD mentioned Jeremy@NoLimit in post SCT tuner towing questions custom tunes... Jeremy@NoLimit Orders-1 800 581 89...
05:43 AM - Heavy_GD mentioned Jeremy@NoLimit in post Help 1st Diesel
... and Jeremy@NoLimit
05:34 AM - Heavy_GD mentioned Jeremy@NoLimit in post High EGTs
Jeremy@NoLimit has you covered. Or...
04:54 AM - Durapig Eater mentioned Jeremy@NoLimit in post Engine has no power when pulling a load
... or maybe kaya or Jeremy@NoLimit could tell us if a p...
07:17 PM - CrazyS0b mentioned Jeremy@NoLimit in post H&S HELP
Jeremy@NoLimit thoughts?
08:29 PM - Rattlesnake18 mentioned Jeremy@NoLimit in post Has H&S Reached The End Of It's Usefulness?
08:28 AM - Heavy_GD mentioned Jeremy@NoLimit in post Safest custom tunes
...I missunderstood... Jeremy@NoLimit
11:22 AM - SDUTY350 mentioned Jeremy@NoLimit in post Deleted Posts
11:20 AM - SDUTY350 mentioned Jeremy@NoLimit in post EGR block-off vs full delete
...the EGR cooler?? Jeremy@NoLimit , Can you give us mo...
09:27 AM - JustinOOO9 mentioned Jeremy@NoLimit in post Another tuner question
Jeremy@NoLimit would be a great r...


07:34 AM - Jeremy@NoLimit quoted ZMANN in post No Limit and Gearhead Issues
well if Jacob is White15 ...
05:07 AM - ZMANN quoted Jeremy@NoLimit in post No Limit and Gearhead Issues
. Jacob Tomey has come on board to ...
05:00 AM - Jeremy@NoLimit quoted CrazyS0b in post No Limit and Gearhead Issues
You should relocate to Minnes...
08:08 PM - CrazyS0b quoted Jeremy@NoLimit in post No Limit and Gearhead Issues
I have done my best to keep in cont...
08:40 AM - Jeremy@NoLimit quoted Heavy_GD in post No Limit and Gearhead Issues
Update your sig Jeremy@NoLimi...
06:06 AM - NorthernYankee quoted Jeremy@NoLimit in post No Limit and Gearhead Issues
I have done my best to keep in cont...
11:49 AM - Jeremy@NoLimit quoted heisman01 in post 2017....and it's time to pull the motor apart
Best I could lay down is a 15 ...
08:51 AM - Mossive quoted Jeremy@NoLimit in post 2017....and it's time to pull the motor apart
Well the time has come. Ole gurl ha...
06:22 PM - Jeremy@NoLimit quoted ron33 in post Anyone from SC stop in and say hello!
Ron in Sumter looking for ...
10:37 AM - Joe35O quoted Jeremy@NoLimit in post H&S Full SD card download links here.
You wouldn't be screwed at all. Let...
04:07 PM - fmnspooch quoted Jeremy@NoLimit in post Need help
Drove to Virginia this weekend brot...
09:16 AM - Justin@DP-Tuner quoted Jeremy@NoLimit in post who is the best tuner
3015 device is not going to work un...
09:46 AM - loxboy1 quoted Jeremy@NoLimit in post 96000 miles, should i do deleats
In my opinion you're about 95000 ov...
10:20 AM - FLOstroked quoted Jeremy@NoLimit in post NL stage 2 intake silicon crush....
Those are our boots. We had a batch...
07:11 AM - ElkSlayer quoted Jeremy@NoLimit in post Upgrading Innercooler Piping
LOL thought you were about to say h...
06:24 AM - Jeremy@NoLimit quoted Jerrybizzle in post Mini maxx for 2015s?
So you're saying it's a hacked b...
06:20 AM - Jeremy@NoLimit quoted ElkSlayer in post Upgrading Innercooler Piping
Jeremy = horse's mouth Sen...
02:13 PM - ElkSlayer quoted Jeremy@NoLimit in post Upgrading Innercooler Piping
You will not need tuning for the cl...
01:30 PM - Jerrybizzle quoted Jeremy@NoLimit in post Mini maxx for 2015s?
Hacked.... So you're saying it's...
07:31 AM - Jeremy@NoLimit quoted Sheepdawg24 in post New guy from GA
Hello all! Hopefully the holiday...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
Members who left positive:
Members who left negative:
Total positive feedback: 0
Submit Feedback
6 Months
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
For the best viewing experience please update your browser to Google Chrome