Ford Powerstroke Diesel Forum banner

4" RCD Suspension with a Fabtech 2" spacer

782 views 2 replies 2 participants last post by  craggio_2001 
#1 ·
Hi Guys,

I recently purchased a 2007 F250 HD crewcab shortbed. It looks to have an RCD 4" suspension on 33x12.50x20's. I need to put new tires on it and know that 35" tires would fit nicely but would like to run 37x13.50x20 with a 6-7" lift. I have a friend that is selling a set of 22x10 Mazzi rims with 37x13.50x20
Toyo's.

I was wondering if I would be able to install the Fabtech 2" spacer or if there is another spacer that might fit that I can install to allow for the fitment of the 37's?

I really don't want to spend alot of money on a lift that I am only going to keep on the truck for about another year because I will eventually, be installing a 14-15" custom lift with 40's.

Thanks,
Chuck

:icon_ford:
 
#2 ·
It should fit with the 2" but they may rub at full lock!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top