Ford Powerstroke Diesel Forum banner

What should stock boost be?

668 views 6 replies 4 participants last post by  NCHornet 
#1 ·
I have a stock 2000 X with 66K miles on it. The only thing that has been done to it is a Beans IDM mod.

What should the boost be. I have only seen 16.14 psi read from a OTC Genysis?

What is expected from a stock truck?

Thanks
 
#6 ·
psd

get under there.and you will see the head and the shaft.its on top of turbo there is a small,small clip that on the butter fly.you take that off and adjust it out about 3 to 6 turns.like i said its small!! you might want to take out turbo.would be easyer.and you would not loose the clip.and you could change O-rings and check donuts to your up pipe to.kill acoulpe birds with one stone.
banks
bd
ron's turbo
all have the big head.
there about $150 and up.
I think ron's is $85
 
#7 ·
You don't need to adjust anything!! Your boost numbers are exactly where they should be for a stock truck!!
Man I thought my Y2K had low miles at 75K, you really need to get out and drive that thing!! I know so do I, LOL!!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top