Ford Powerstroke Diesel Forum banner

Possible to remove 5" lift?

803 views 8 replies 6 participants last post by  fordpwrstroke7 
#1 ·
Hey guys

I'm thinking that sometime down the road I'll probably pull the 5" lift off my truck if possible. I'd like to go to something like a 2" lift or I guess even factory height. Is this even possible? If so, can I just buy a 2" lift kit and swap out the parts, or will I need to find some factory stuff to go with it?

thanks!

Jonathan
 
#2 ·
It all depends on what kind of lift you have on the truck right now.

You most likely will need new front leaf/coil springs, rear blocks, and the pitman arm will need replacing.

You may want to see if someone that has a truck like yours is looking for a lift. Then you can just swap out parts.
 
#4 ·
I have 2 sets of stock leaf springs and all the other stuff. one from a late 99 and one from an 01
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top