Ford Powerstroke Diesel Forum banner

Making my Icon 4.5" bigger...

885 views 4 replies 3 participants last post by  OCVeloMan 
#1 ·
So I think I can add a spacer to the front. Do I need to get the spacer from Icon or can I use any of the same type of spacer?

What do I do with the rear? Will the shocks with this kit work with the taller lift?

Thanks!
 
#2 ·
I added the Icon TEI spacer to the front and 1 inch taller blocks in the rear to my 2005 with no problems. With that being said, you may have to adjust the caster again.
 
#4 ·
The drop brackets installed during the lift put the caster back to original. When you start adding more lift the caster will change, 1 inch would not be a big change unless it was at the low end of the specification from the factory. I will get a picture up asap.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top