Ford Powerstroke Diesel Forum banner

Sensor Trouble!!!!

953 views 5 replies 4 participants last post by  twoicebergs 
#1 ·
Got an 04 6.0 and I found a sensor broke while looking around under the hood.. And i have no idea what it could be. If standing in front on the truck it's on the driver side almost underneath we're the fuel filter goes under the hood .. I uploaded a picture on here don't one it it worked or not but its the sensor.. Hopefully someone can help me out
 

Attachments

See less See more
1
#3 ·
Yes, that is the EBP sensor on MYs 03-04. It is a 50psi 3-wire, 5v sensor, 1/8" npt fitting. The later model year EBPs are different, they use a JIC fitting.
 
#6 ·
The truck is idleing high and a light miss in it .. The I found the sensor but the engine light or any thing is on?????
I have no clue what you are asking? Your sensor is broke in 2 pieces with the interface connection broke inside the plug.

The sensor in the picture below is used in a different location. However, it is the same dimensions as your broken sensor. This is what it is suppose to look like.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top