hello all, I need some information please. I am running B100 and have had 2 fuel lines from the regulator to the heads melt. The shop that will make me new ones needs the following and I cant find it anywhere:
Size - Inside Diameter, length, and Outside diameter
Temperature - Internal and External; normal, minimum and maximum
Pressure - Normal working pressure, burst pressure
Ends - what type, size, thread
I plan on SS teflon hoses. If anyone has a definitive source for this info I would greatly appreciate the help.
If you are running B100 in an OBS I would strongly suggest you frequently inspect your lines. This was not an obvious issue and I did not check until I got word about a lot of people having this issue.
Thanks a lot.
Size - Inside Diameter, length, and Outside diameter
Temperature - Internal and External; normal, minimum and maximum
Pressure - Normal working pressure, burst pressure
Ends - what type, size, thread
I plan on SS teflon hoses. If anyone has a definitive source for this info I would greatly appreciate the help.
If you are running B100 in an OBS I would strongly suggest you frequently inspect your lines. This was not an obvious issue and I did not check until I got word about a lot of people having this issue.
Thanks a lot.