Ford Powerstroke Diesel Forum banner

oi/lcoolant guage

905 views 7 replies 3 participants last post by  strokermann 
#1 ·
ok here is the deal i am wanting to put a oil and coolant guage in. maybe just one of them but not sure whiich yet. so if anyone knows were to tap into for either of them please let me know. thanks
 
#3 ·
yep thats what i am after just not sure if i wanna do both or just one of them. and i am not quite sure on were to tap into for them.
 
#4 ·
On the oil filter adapter there is a plug that you can remove put a fitting there and you can install a pressure sending unit for the oil pressure gauge. Engine temp I will have to look around on the engine but I am sure I can find a water plug somewhere that can be removed and a sending unit installed.
 
#6 ·
In talking with one of our suppliers I was told that the coolant temp gauge on an 02 actually measures the oil temp of the engine . Can this be, I never heard of such a thing before?
 
#8 ·
ok right on. what about the coolant do you know that scott only place i can tell is were the sensor is for teh dash gauge.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top