Ford Powerstroke Diesel Forum - View Profile: sbluke55

sbluke55 sbluke55 is offline

Compression Ignition Addict

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. Billy231
    02-15-2016 07:33 AM - permalink
    Billy231
    Hello, sorry to bother you here but being you mentioned a few things regarding my truck last week I had a few questions that maybe you can shed some light on for me. I have the 99 F250 with low miles with the plow on it.
    A friend of mine has a brand new set of wheels and tires off his 2013 F350 with the Michelin 275/70/18, I know they'd be a sweet upgrade for me 1999 with 16's. You did mention I'll need the 2" spacer kit. Would that be needed on all 4 wheels? If so can you recommend a kit or place that sells them?
    I looked on eBay and see them there but as you know, you get what you pay for there and I don't wanna end up with ****.

    My local truck shop told me I was only able to buy the leveling kit for my truck that only comes as a kit for front and rear ($425) plus labor etc.. Yet I may not need them for the tires I'll be putting on but I'd still like to level it off.
    Any help would be appreciated in sending me any info or places to order from.
    Thanks Billy.
  2. Grampa's money pit
    12-15-2015 06:36 PM - permalink
    Grampa's money pit
    Thank you for your reply. My truck is nowhere near as fancy/built up as your truck. I am starting out with A new long block, upgraded with head studs, forged rods, stellite valves. Rebuilt injectors/turbo. 3" down from the turbo to 4" the rest of the way out. Have a power adder from a local diesel shop that has built up alot of 7.3 powerstrokes. Have A nice day.

  About Me

  • About sbluke55
    State/Province
    Colorado
    Gender
    Male
    Exact Location
    Grand Junction, CO
    Ride
    01 F250
    Engine
    7.3 DI factory turbocharged
    Cab Configuration
    Crew Cab Short Box
    Drivetrain
    Single Rear Wheel 4X4
    Tranny type
    6 Speed Manual
    Tires
    Mudders
    Primary Vehicle Use
    hunting and fun
    Horsepower
    0.0
    1/8 Mile ET
    0.000
    1/8 Mile MPH
    0.00
    1/4 Mile ET
    0.000
    1/4 Mile MPH
    0.00
  • Signature
    01 f-250, Standard
    Rev tech 4" lift,37" military wrangler Mt tires
    KC diy 66, Full force 160/100 and custom tunes from PHP
    Banks inner cooler and full 4" exhaust, Diy S&B intake
    Diy quad feed, Hydra, Isspro boost, pyro, and fuel pressure
    3/0 battery cables with military style terminals

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 02:22 PM
  • Join Date: 09-25-2013
  • Referrals: 0

  Friends

Showing Friends 1 to 1 of 1
  • rsater1
    • rsater1
    • Compression Ignition Addict
    • rsater1 is offline

  Garage

    2001 Ford F250
    ol' blue

  Mentions

06-22-2017
06:04 AM - sbluke55 mentioned masakimm in post New to site not to powerstrokes.
...n post links? Is so masakimm you might have to lo...
06:04 AM - sbluke55 mentioned ZMANN in post New to site not to powerstrokes.
Hahaha. ZMANN is it 15 posts tell ...
06-19-2017
04:34 AM - sbluke55 mentioned Corey@CNCFAB in post Ford 7.3L Powerstroke Oil Leak: Turbo Pedestal Seal Replacement
... a delete pedestal. Corey@CNCFAB can hook you up.
06-16-2017
05:39 PM - AzPatMan mentioned sbluke55 in post CSP chat thread
sbluke55 Well, looks like I ...
07:34 AM - sbluke55 mentioned layson in post '06 F250 SD with 14" Lift, Drives Horribly
layson might know too. I ...
06-15-2017
08:09 AM - sbluke55 mentioned Corey@CNCFAB in post Cheap intakes
Corey@CNCFAB can you help him out...
06-02-2017
06:13 PM - Rattlesnake18 mentioned sbluke55 in post June 17 ROTM poll
...arning to spell, or sbluke55 is.:look:
06-01-2017
05:33 AM - Heavy_GD mentioned sbluke55 in post June 17 ROTM poll
...72341948_HDR.jpg sbluke55 http://i1294.phot...
05-31-2017
05:24 AM - sbluke55 mentioned Corey@CNCFAB in post TS 6 Position Chip Questions
Buy your chip from Corey@CNCFAB. He has ts6 chips wi...
05-11-2017
07:34 AM - sbluke55 mentioned Corey@CNCFAB in post Injector advice
Corey@CNCFAB can take care of you...
03:40 AM - sbluke55 mentioned Corey@CNCFAB in post Making me early 99 to a late 99
...lly would talk with Corey@CNCFAB and see about gettin...
05-10-2017
06:19 AM - Corey@CNCFAB mentioned sbluke55 in post Why Black smoke ?
...ng on a budget. As sbluke55 mentioned, gauges ar...
05:57 AM - sbluke55 mentioned Corey@CNCFAB in post Why Black smoke ?
...xhaust, and gauges. Corey@CNCFAB can hook you up. A...
05:50 AM - sbluke55 mentioned Corey@CNCFAB in post Making me early 99 to a late 99
Corey@CNCFAB can get you a hpop. ...
04-22-2017
02:28 PM - Rattlesnake18 mentioned sbluke55 in post Annual G2G BBQ
...e trip 323flint and sbluke55, it was great to fin...
04-19-2017
05:09 AM - sbluke55 mentioned peixinho in post Buying new turbo and injectors today.. need advice!
...wed up pipes. Also peixinho is coming out with a...
05:09 AM - sbluke55 mentioned Chatham036 in post Buying new turbo and injectors today.. need advice!
...in a tow tune. Plus Chatham036 from php said it was...
04-14-2017
05:34 AM - sbluke55 mentioned mach65 in post found this on craigs list
...rappy taillights. mach65 are you willing to t...
04-13-2017
11:09 AM - sbluke55 mentioned AzPatMan in post Annual G2G BBQ
AzPatMan what time is the bbq...
04-06-2017
08:11 AM - blue99stroker mentioned sbluke55 in post What did you do to your 7.3 Today?
...y. Shout out to sbluke55 he sent me a new coi...

  Quotes

06-24-2017
07:36 AM - jluv quoted sbluke55 in post Wreck = Makeover (Before and After Pics)
Nice looking truck. Here are ...
06:57 AM - VarmintSniper30 quoted sbluke55 in post 99 f350 wheel hub area help please
Looks like you need a new stu...
06-22-2017
09:15 AM - masakimm quoted sbluke55 in post New to site not to powerstrokes.
It's 30 for sure. I know that...
07:27 AM - r_marczak_83 quoted sbluke55 in post New parts galore. Still doesn't run right
Also delete the autoguide app...
06:11 AM - r_marczak_83 quoted sbluke55 in post New parts galore. Still doesn't run right
You can run hydrid injectors ...
06:05 AM - masakimm quoted sbluke55 in post New to site not to powerstrokes.
Hahaha. ZMANN is it 15 posts ...
06-21-2017
06:51 PM - forthehalibut quoted sbluke55 in post CSP chat thread
Google hutch/ harpoon mods. Y...
06:47 PM - mud.princess quoted sbluke55 in post New to site not to powerstrokes.
Uh. You guys here too. Did...
04:46 PM - masakimm quoted sbluke55 in post New to site not to powerstrokes.
Uh. You guys here too. Wha...
07:47 AM - Heavy_GD quoted sbluke55 in post Grease for Hot Climates
My coworker makes a diaper ou...
06-20-2017
07:19 PM - sbluke55 quoted forthehalibut in post CSP chat thread
I'd like to. Maybe you could help...
06-19-2017
07:43 PM - AzPatMan quoted sbluke55 in post CSP chat thread
Icp/ipr?......... that or ...
12:09 PM - mikethaninefive quoted sbluke55 in post e99 Trans WTH are these?? Wire and a Plug
The tape around that single w...
09:21 AM - sbluke55 quoted JustinOOO9 in post What did you do to your 7.3 Today?
not sure to be honest lol... ...
09:13 AM - sneeper69 quoted sbluke55 in post '06 F250 SD with 14" Lift, Drives Horribly
layson might know too. I ...
06-17-2017
08:00 PM - Rattlesnake18 quoted sbluke55 in post Dumbest pics..whatcha got?
My local library is infested ...
07:50 PM - comvet42 quoted sbluke55 in post Dumbest pics..whatcha got?
My local library is infested ...
09:43 AM - AzPatMan quoted sbluke55 in post CSP chat thread
Where is the fuel level at?1/...
06-15-2017
06:00 PM - G8orFord quoted sbluke55 in post 6.0 Chat Thread
Posted where I didn't want to...
12:26 PM - sbluke55 quoted ZMANN in post e99 Trans WTH are these?? Wire and a Plug
Probably not. I ain't got ...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
1
100.0%
Members who left positive:
Members who left negative:
1
0
Total positive feedback: 1
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome