Ford Powerstroke Diesel Forum banner

Fuel Bowl Thread Size

4K views 7 replies 3 participants last post by  dazdillenger 
#1 ·
I have and 03 F250 is the aux fuel port on the secondary filter bowl thread size M!2-1.5?

Possibly later years a different thread? what would that be?
 
#2 ·
subscribed
 
#3 ·
If its the above thread size i have everything for a home made fuel pressure gauge and enough for another. I believe there is a different size thread for possibly 05-07 trucks but i am not sure. Trying to decide if i want to hard mount it under the hood somewhere or make it quick connect, I have all i need to do either scenario.
 
#4 ·
I need to build a permanent setup for my truck as well. Figured I'd subscribe and see what pops up!
 
#5 · (Edited)
Im just gonna try it and see how it ends up i will post up picks, if it all works out maybe i could set you up with my other set seeing how your a fellow ESS. I think it will work perfect all i need to fab up is some type of mount in a good location where it wont get hit and is easily visible.


Its a brand new 0-150 psi gauge with a stainless steel braided line (about 12"-15" long) and fittings, with or without quick disconnects.
 
#8 ·
Keep in mind, the most important fuel pressure reading is taken under WOT and load, so make sure you can see it under those conditions.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top