Ford Powerstroke Diesel Forum banner

Bump Stop Size

2K views 1 reply 2 participants last post by  JBakerFX4 
#1 ·
I put a set of Nitto 295's on my 06 F350 Dually and then wanted to get a height also. The truck was level from the factory and I put a 2.5 in leveling kit on the front which really gave me the fender clearance I was looking for. But now I would like to raise the rear about 2 in. and I don't want to add blocks. Does anyone know what the height of an F-450 bump stops are and could I use these to replace mine and get the added hieght I'm looking for.
 
#2 ·
bump stops don't give height. they limit upward suspension travel. Height comes from Spring or Blocks. If you're looking to raise the back end... you need to add a block, or get new lifted springs. A or B.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top