Ford Powerstroke Diesel Forum banner

Brake controller

619 views 4 replies 2 participants last post by  Levand16 
#1 ·
my integrated controller is set on 10 but when coming down a hill with 3 to 4 horse in tow I only have 3 of the bars light up on the controller. but when I use the slide lever I get all the lights and you can feel the trailer stopping the truck
I called the dealership and they told me that the controller runs off the speed of the truck the faster your going the more voltage is applied to the controller. does this sound right to any:dunno:
 
#4 ·
I just talked to the dealership again this time to a mechanic. said I have a ground problem. said to check by running a extra ground wire from truck to trailer
or I have a bad magnet. check by unhooking all of them and check the ohms on each should have .4 to .6 ohms on each
if higher replace that one
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top