Ford Powerstroke Diesel Forum - View Profile: turbotibbo
Powerstroke.org is the premier Diesel Truck Forum on the internet. Registered Users do not see the above ads.

turbotibbo turbotibbo is offline

Premium Member

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Gearhead2012
    11-13-2013 07:58 AM - permalink
    Gearhead2012
    Woe I feel like a real dumb ***. I just see under my last post that I had in fact already answered your question. Woops.
  2. Gearhead2012
    11-13-2013 07:57 AM - permalink
    Gearhead2012
    Hey man, I just now saw your visitor message you left...yeah it can be done they make a stepped dowel pin. None of that matters so much...all that really matters is that you have .035" or more of clearance from the injectkr clamp to the rocker box. The trouble is that they actually made 2 versions of the 20mm heads, there were 2 different rocker box dowel pin locations, the earlier 20mm heads will take the same rocker box as 18 mm heads the later model uses a rocker box with dowel pins in a different location, which will work if you use the right rocker boxes. If the 20mm heads have 10mm threads around the perimeter of the rocker box bolts, 2 of them I believe then it takes the later style rocker box. If the bolt holes on top of the hesd where the rocker box bolts down to is 8mm threads (2-3 along the side nearest the intake ports) then it'll take the same rocker box as 18mm dowel heads.
  3. Gearhead2012
    01-21-2013 11:42 AM - permalink
    Gearhead2012
    It will bolt on, they make a stepped dowell pin, that converts 18-20, but the injector hold downs are different. Injectors are the same, so as long as you swapped out the hold downs you'd be ok, and the appropriate gaskets and dowel pins. Good luck.

About Me

  • About turbotibbo
    State/Province
    Alberta
    Tranny type
    Torqshift
    Horsepower
    0.0
    1/8 Mile ET
    0.000
    1/8 Mile MPH
    0.00
    1/4 Mile ET
    0.000
    1/4 Mile MPH
    0.00
  • Signature
    2006 ford f350 xlt cclb
    blue spring mod
    6.4 banjo bolts
    gogo direct cluth solenoid
    Insight cts with pyro
    str8 pipe , fuel pressure gauge
    air raid cold air
    zoodad mod
    high idle mod
    sinister coolant filter kit ec-1 rated
    58 volt ficm
    powermax turbo , sinister y pipe
    egr delete
    sct x3 with running looney wild , spd early lock up
    arp studs , updated stc fitting ,stand pipes,
    dummy plugs , new oem injectors

Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 08-10-2014 08:48 PM
  • Join Date: 03-13-2012
  • Referrals: 0

Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
View Complete Feedbacks for turbotibbo
  Past
Month
Past
6 Months
Past
12 Months
 Positive 0 0 0
 Neutral 0 0 0
 Negative 0 0 0

All times are GMT -8. The time now is 04:18 AM.


Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.1
Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors