Ford Powerstroke Diesel Forum banner

6.0 headache

2K views 3 replies 2 participants last post by  samuel 
#1 ·
I,m new to the forum myself. Had simular problem with '02 and replaced fuel pump, runs fine now.

I have problem now with '05 6.0 that put head gasket on and now shows no oil pressure and want start. Can anyone give me some advice?
 
#2 ·
There you go Samuel, you now have your own thread, I'm sure one of the techs will be along to help with your problem, good luck.

Gord.
 
#4 ·
>>> Finally got it to start. Did not know proper way to bleed oil system so I
>>> improvised. Took sensor out of valve cover and pulled a vacuum,
>>> itworked. Now Ijust want to know of any other things needed to be
>>> checked after this repair, installed new radiator, hoses, thermostat,
>>> and fan clutch.

>>> Oh,by the way, this is not a personal truck. It is an ambulance that
>>> does across state transfers.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top