CMP for '95 DIT: Which is the Right P/N?

[John Miller]

I've found all manner of commentary on the infamous cam angle position sensor issues on the 7.3 DIT family. For my '95 F250, some folks say to go ahead and replace it with the new blue one (even though it's supposed to be for only '96.5 and later vehicles), but I've seen precautionary notes that doing so will retard my injection timing by a few degrees. What's the correct replacement P/N for the sensor in my '95 F250?

Thanks.

-John

[ianstew]

there is a tutorial somewhere, by maintain i belaive that has a part number in it. i used that one, and it was 30 bucks at ford. it was grey BTW