BOOST GAUGE install ?

[Farmertom390]

Well I am installing my gauges and i was wondering where do i put the thing for the boost gauge? The other ones i think i understand and will have going good

[eschaner]

Well if your talking about the "T" for the vacuum line. It needs to be tee'd into the hose going to the map sensor.

[Marty]

Or you can drill/tap the intake spyder or do the AIH delete and drill/tap a bolt that sits in there.

[Farmertom390]

I cant find the hose to plug it into, there is only one gray hose on the top of the passenger side valve cover?

[eschaner]

Did you find the map sensor? I hose goes in the bottom of the sensor.

[Farmertom390]

Well it looks like I am missing the Ferrule? and the compression nut for on the back of my boost gauge.

[vitalidle]

Here is a link to a pic that might help you3-Gauge Install Pictures

[vitalidle]

By the way which truck is this gauge going on?

[eschaner]

Is your line plastic or rubber? My gauges have a clear rubber hose that slips on a barb fitting.

[Farmertom390]

This is going in my 05 6.0 I dont have the 7.3 any more, i should delete it from my sig but I miss it haha

Thank you guys for putting up with this.