accelorator pedal fell off - Ford Powerstroke Diesel Forum
General Diesel Discussion Discuss everything else pertaining to Diesel Pickups.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 Old 06-26-2013, 08:00 PM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
accelorator pedal fell off

About a month ago I was driving and went to hit the gas and it felt different. Looked down and noticed the pedal had fallen off. I pulled over and slipped the pin/spring/pedal (that's all the parts I found on the floor mat) back together on the shaft but it's never stayed on right since. I've looked around the local wreckers and online but haven't seem much info on this issue or how it goes back together. One place I haven't been is to a dealer. I've heard I may require an entirely new assembly as the pedal may have been moulded to the shaft but it doesn't look broken...any help is appreciated!

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
post #2 of 11 Old 06-26-2013, 08:04 PM
,,,,,,,,,,,,,,,,,,,,,,,,,
 
ZMANN's Avatar
 
Join Date: Feb 2008
Posts: 16,290
Thanks: 720
Thanked 814 Times in 783 Posts
Mentioned: 86 Post(s)
Quoted: 924 Post(s)
Feedback Score: 0 reviews
adjustable pedals or non ?

.
.
.
Please donate to DTR Ron's Memorial
https://www.gofundme.com/2464axqr
We Miss you Ronnie
RIP
ZMANN is offline  
post #3 of 11 Old 06-26-2013, 08:07 PM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Yes the pedals are adjustable.

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
post #4 of 11 Old 06-26-2013, 08:10 PM
,,,,,,,,,,,,,,,,,,,,,,,,,
 
ZMANN's Avatar
 
Join Date: Feb 2008
Posts: 16,290
Thanks: 720
Thanked 814 Times in 783 Posts
Mentioned: 86 Post(s)
Quoted: 924 Post(s)
Feedback Score: 0 reviews
ok well you don't want to pony up for those $$$

I have not messed with them and it's to dark to go see mine

I would imagine it would have a retaining clip ? was there a grove or anything on the pin ?

.
.
.
Please donate to DTR Ron's Memorial
https://www.gofundme.com/2464axqr
We Miss you Ronnie
RIP
ZMANN is offline  
post #5 of 11 Old 06-26-2013, 08:19 PM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
yikes no doubt. I can get one for about half the cost the dealer is charging for the whole assembly but ...I'll try and post a picture here now.

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
post #6 of 11 Old 06-26-2013, 08:28 PM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
the pin is smooth at the end, but has grooves (not sure how to describe them otherwise) along the length of the pin and they're around the circumference of the pin.

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
post #7 of 11 Old 06-26-2013, 08:35 PM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
post #8 of 11 Old 06-26-2013, 08:56 PM
,,,,,,,,,,,,,,,,,,,,,,,,,
 
ZMANN's Avatar
 
Join Date: Feb 2008
Posts: 16,290
Thanks: 720
Thanked 814 Times in 783 Posts
Mentioned: 86 Post(s)
Quoted: 924 Post(s)
Feedback Score: 0 reviews
Quote:
Originally Posted by oilfieldguypaul View Post
if u need help with the pic PM Me your email address I will contact you and post it up

.
.
.
Please donate to DTR Ron's Memorial
https://www.gofundme.com/2464axqr
We Miss you Ronnie
RIP
ZMANN is offline  
post #9 of 11 Old 06-27-2013, 06:01 AM
,,,,,,,,,,,,,,,,,,,,,,,,,
 
ZMANN's Avatar
 
Join Date: Feb 2008
Posts: 16,290
Thanks: 720
Thanked 814 Times in 783 Posts
Mentioned: 86 Post(s)
Quoted: 924 Post(s)
Feedback Score: 0 reviews
bummer it does look like the center should be a method of retention

I would come up with an alternate plan if u can access both sides I would use a longer pin with external retainers

I don't see a pic in your post ?
Attached Thumbnails
Click image for larger version

Name:	20130627_001531.jpg
Views:	36
Size:	93.6 KB
ID:	130746  

.
.
.
Please donate to DTR Ron's Memorial
https://www.gofundme.com/2464axqr
We Miss you Ronnie
RIP

Last edited by ZMANN; 06-27-2013 at 06:10 AM.
ZMANN is offline  
post #10 of 11 Old 06-27-2013, 10:13 AM Thread Starter
Member
 
Join Date: Jun 2013
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
It 's almost like a puzzle to put together and I'm missing one piece! I'm going to check the dealer and see what they have to offer. I've had some help from my dad too but it's like we're missing the one way to do it or it is actually broken...

2004 6.0 F250 Crew Cab
ficm rebuilt, atlas 40 tune
egr delete, arp studs, head gasgets
hpop, turbo replaced
oilfieldguypaul is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome