DIY Water Injection

[Tikal]

Has anyone considered crafting one of these up themselves. It can't be complicated...

You can get most of the parts from town, but some pumps cannot tolerate methanol

The only thing I'm thinking may actually have to be bought is the nozzles and the boost actuator?

I'm not too familiar with plumbing, that's why I say the nozzles.

Any ideas to save us from spending $500 on $50 worth of parts?

[MrJohnWayne]

I've though about it before. never really put anything to paper but one of these days I will.

You are right for about 200 bucks in parts with some spare time you can save several hundred.

[silverF250]

Hope someone has some good ideas. I've been thinking the same thing.

[Marty]

You can buy everything you need minus the tank online for around 300 bucks now...

I'll see about finding the link - I found it the other day.

[Marty]

Oh, here are some kits...

Water Injection, Methanol Injection systems | Coolingmist

[Marty]

Water Injection, Methanol Injection systems | Coolingmist

This is the one I was talking about though - Coolingmist Stage I Diesel NO TANK