Recon Light Bars

***Jameson*** · #1 (**permalink**) 10-26-2007, 01:10 PM

Im putting on my 07 Z71 (chevy I know, no spitting please), but I can get the the darn turn signals or brake lights to work! The running lights and reverse lights work .BTW Im hardwiring it. Any help?

**Logan** · #2 (**permalink**) 10-26-2007, 02:23 PM

Just hard wire it off of your 4 pin plug and you should be fine. That is the easiest way. Just find what matches up with the wires and the plug and there ya go.

***Jameson*** · #3 (**permalink**) 10-26-2007, 03:29 PM

Mine isnt 4 pin like the fords its like an 8 pin or something Ive never had before.

**Logan** · #4 (**permalink**) 10-26-2007, 03:40 PM

Oh ok, well, on the cover of my 8 plug, it tells me what connections does what...does yours have that?

***Jameson*** · #5 (**permalink**) 10-26-2007, 06:45 PM

Yes it does to an extent, but on the harness behind the plug it gives me a color code for what each wire is. I wired it that way and it seems like there is some sort of safety or something because only the running lights and reverse lights work. I dont understand!! LOL

**Logan** · #6 (**permalink**) 10-26-2007, 07:39 PM

Hum, not sure. Maybe call Chevy and see if they can look up the wires and colors for ya, that way you will know for sure.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode