hid install

tinab2580 · #1 (**permalink**) 10-10-2007, 03:41 PM

hi i am not sure i'm in the right place but maybe someone can help me.... i'm new here... i just got a 08 f250 king ranch, and i am trying to install hids on it.... i got them in the fogs already.. for the headlights i got real bi-xenons, lo and hi are both hid.... this kit comes with 4 ballasts 2 9008 hi/lo xenon bulbs and a relay.... i tried hooking it up today and the left side works out ok, but the right side is giving me problems.... everytime i flick from lo to hi beam the right side goes out... has anyone else tried this before

Strõkër~X · #2 (**permalink**) 10-10-2007, 05:20 PM

well i will give you a bump, there are some with the HID conversions here!

red73psd · #3 (**permalink**) 10-16-2007, 01:00 AM

bump i have the conversion. but i couldnt figure out how to get my highs to work. so i would like to know to. my best bet would be to go through and recheck everything

rednek01 · #4 (**permalink**) 10-16-2007, 04:59 AM

Pm GCOP he knows tons about HID lighting and will be able to direct you in exactly what to do. He is the one that hooked up mine for me!

red73psd · #5 (**permalink**) 10-19-2007, 02:05 AM

do your headlights work to

fenwick · #6 (**permalink**) 10-23-2007, 03:23 PM

Let me know if you get it figured out because I am having the same problem with mine. My hi-lo kit only came with 2 ballast and 1 relay. I haven't figured out how to get the high beams to work yet, and now the low beams are starting to flash like there is a short somewhere.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement