![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| General Diesel Discussion Discuss everything else pertaining to Diesel Pickups. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
blinker problem
we just acquired an 05 e350 14ft box truck.... It only has 7900 miles lol. In the process of outfitting and setting the truck up for work, so I serviced and inspected it today, the left and right blinker flash fast, hazards are fine. I changed out the flasher with 3 I had in stock, cheched and verified all bulbs working, and truck specific correct. No LED bulbs, all stock, standard lights for this truck.
I'm stumped... Help please haha |
| Sponsored Links | ||
Advertisement | ||
|
|||
|
Try pushing the turn signal lever down slowly. My truck does the same thing if I flip on the signal too fast. I guess the lever is bad, but I've learned to live with it
|
|
|||
|
Yeah, I've seen them that do that. This truck is practically brand new. The switch is very tight and does the same thing weather you move it quickly or slowly
|
|
|||
|
blinker fluid is low.
|
|
|||
|
Yeeeaaahhhh, and where is the resivore again lol
|
|
|||
|
under the hood next to the ac compressor.
|
|
|||
|
Damn... I'll have to check that, might as well service the flux capacitor while I'm there
|
|
|||
|
Check all the wire plugs, one of my plugs came loose under the bed/bumper and would make them blink fast and sometimes not at all.
|
|
|||
|
Hey at least your work mine have not worked in a month
|
|
|||
![]() Didn't I see where your horn and cruse doesn't work either. My cruse stopped working a long while back, still havn't figured that out. |
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|