tymar intake

[scotty2280]

i was wondering where you get these at and around how much they are?

[bigcountrysg]

Originally Posted by scotty2280

i was wondering where you get these at and around how much they are?

Ebay 120 dollars. But there are some members/vendors on the site but I don't know how much they are from them. But for about 100 bucks you can make your own.

[Raul@Stealth Automotive]

Originally Posted by bigcountrysg

Ebay 120 dollars. But there are some members/vendors on the site but I don't know how much they are from them. But for about 100 bucks you can make your own.

yup it will just be cheaper if you make your own.. i can prob get you a set sent off to you but by the time i add shipping it would of cost you the same to just go order the parts to napa....

[johnroach100]

You can make your own for a few bucks cheaper, but why bother? I bought a Tymar and a spare filter for like $150 delivered. If I had known how big the filter was I would have left it off. It's going to take forever to need the spare, not that that's a bad thing.

[gcop]

the NAPA filter is about $50 and a piece of PVC pipe and a few clamps are about $6, it is much cheaper to DIY on this one....

[Cj Ford]

is pvc pipe ok to use? or will it deteriorate? I have decided to do my own rather then buy a kit.. but I cant find any 4" aluminum pipe just mild steel and alum coated..and i read thats not good to use due to rust

[gcop]

I have not had any problems at all, been on for about 6-7 months now, The PVC I bought was a little thicker, I wanted to make sure I had plenty to clamp down on.

[vitalidle]

I don't see why pvc should be a problem. I bought the afe torque tube and its plastic. Here is where I bought my nappa filter. The store in town wanted 48 bucks I think after my discount. I think it was 35-38 bucks shipped from texas to michigan from this place part number 46637FleetFilter.com

[Maintain]

This is all you need to read...
DIY Intake

This is where you can have it shipped to your door for about 30 bucks - add in a free 4" piece of SS exhaust and 1 4.5" hoseclamp for like 2 bucks and you've got yourself an intake!
FleetFilter.com