Ford motor work

[F350 STROKER]

is it true that when the motor has to be worked on the cab of the truck had to come off?

[Jarrod B]

on a 7.3 obs no. 7.3 sd kinda. 6.0 and 6.4 OH YEA. those engines are packed in so much that the only way to work on em is pull the cab.

[Dave]

Originally Posted by bockhold

on a 7.3 obs no. 7.3 sd kinda. 6.0 and 6.4 OH YEA. those engines are packed in so much that the only way to work on em is pull the cab.

7.3 no not at all. 6.0 depends on what you are trying to do. 6.4 get it up in the air

[Jarrod B]

Originally Posted by Dave

7.3 no not at all. 6.0 depends on what you are trying to do. 6.4 get it up in the air

well on the 7.3 sd i havnet pulled it yet so i didnt know for sure.

[F350 STROKER]

is that king of the hill in your avatar thing that is is the the sh**

[2005F250]

The only one you have to lift the cab on is the 6.4. I have never seen a cab off of a 7.3 or 6.0 at the dealer and anything that can go wrong on the engines they've repaired. They even repaired a 6.4 in cab because there was a rack over the cab.

[F350 STROKER]

hmmm idk alot of guys say that the cab comes off on work for the 6.0

from my experiance the 7.3s you can do with out pulling the cab, the 6.0s you can work on them with the cab on but there is ALOT to tear apart to do this, most just pull the cabs. All work i have seen on the 6.4 (major work) has also been cab off

[F350 STROKER]

now with the dodge and gms they dont do this

[F350 STROKER]

ok so that would be a problem for me i fi like doing the work myself now that cab off is only on the diesel not the gas and dodge and gm diesels cabs dont have to come off?