Chest Toolbox with a Roll-n-Lock

[ThirdCoastStroker]

My dad just picked up a 2012 Superduty King Ranch 8' bed. He wants to do a chest box with some sort of Roll-n-Lock cover. Does anyone have a setup like this? truck will be used to pull a boat and a fifth wheel and he wants to be able to lock up stuff in the bed, but also needs a tool box. He doesnt want to have to slide his toolbox bck 14" from the front of the bed and lose all the space. Does anyone make a good come/setup for a in bed tool box with one of these covers. cant be a hard cover because of the fifth wheel.

thanks

[ZMANN]

Well yes I have that setup kind of LOL mine is a short bed and I don't need a 5th wheel hitch but I think this setup may work for him

I converted the weather guard chest to an electrical solenoid and it opens with a button on the remote

then I mounted the can for the roll and lock flush to the chest ( I access the chest so much
I choose not to cover it with the roll and lock)

then I cut down the R&L bed rails to fit


now I bought my R&L used and it was for a Long Bed ,, but I knew I was modifying and for 200 bucks I couldn't be picky LOL the can for the long bed is bigger than the shortbed so If He does this I think He could actually save room by using a short cover ,, I also have the chest slid back enough to have about 3 inches between the bed and box for quick stuff like garbage or wet clothes etc and I have drop in ladder racks so that worked out well for the front mount well

[ZMANN]

I have also seen a combo unit I am sure a Google will find it for you

[TD444EVER]

Socaltrucks.com - Lifted Truck Classifieds

this guy has a setup similiar to what you want i think ..no info but maybe the pictures will help

[ThirdCoastStroker]

Originally Posted by TD444EVER

Socaltrucks.com - Lifted Truck Classifieds

this guy has a setup similiar to what you want i think ..no info but maybe the pictures will help

I dont see any bed cover on there...

[TD444EVER]

Originally Posted by ThirdCoastStroker

I dont see any bed cover on there...

my bad i thought u were looking for a toolbox to mount in the bed kinda like what that guy has set up i know it blocks the hitch mount area but i figured it might give you ideas

[ZMANN]

Google had this American Work Cover Roll Cover with Tool Box by Truck Covers USA - Free Shipping

[Lowdown89]

Maybe something like this 5th box in the bed? And then the roll and lock cover over it ?

[xyzzy]

TracRac G2 is the only way to go

[Keel056]

I think Bakflip bed covers offers one as well.

BakBox : BakBox toolbox : Bakflip tonneau cover toolbox