Need help with reflash...specifics

PowerstrokeNC · #1 (**permalink**) 10-23-2010, 05:16 PM

Just got my 2011 about 10 days ago and the dealer told me that all their trucks had already been re-flashed. I took this information at face value.
My question is when you have had the re-flash the right hand side of the info screen in the instrument cluster shows numbers 1 through 6 and what gear the truck is in correct?

If this is correct then all is OK because this was how my truck was when I got it.

But then...... the numbers disappeared. I thought it was because I had switched into one of the other screens, but I have since toggled through all of them and no luck the gear display is gone.

The only time I can get the numbers back is to go into "M" but that is not the same display anyway.

Can anyone shed some light on this?

thanks

pipeliner08 · #2 (**permalink**) 10-23-2010, 05:37 PM

Press the up arrow on the shifter to bring them back up

PowerstrokeNC · #3 (**permalink**) 10-24-2010, 11:20 AM

thanks I will try that.

PowerstrokeNC · #4 (**permalink**) 10-24-2010, 06:00 PM

Yep! that did it, thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement