Ford Powerstroke Diesel Forum banner

Broken Headlight Adjuster

1K views 2 replies 2 participants last post by  brendanlush 
#1 ·
Hey guys.

I was adjusting my headlight this past weekend and I must have turned the hex screw too much and it snapped off in my 5/32 driver. Is there anyway to manually adjust the headlamps?

I replaced my old HID's with a set of DDMTuning and the driver side beam was way too low.

Any help would be appreciated!

I also asked in the body section but with no avail, hopefully someone can chime in!


Sent from AutoGuide.com App
 
#2 ·
Not sure where it broke off at but maybe you can get to nuts threaded on it so you can turn the nuts themselves.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top