Cruise Control Issue/Fixing it.

[TheNewGuy]

My cruise control quit working, so I got it looked at and its the cruise control deactivation switch on the master cylinder.

So the question is has anyone changed it out on their own? If so, how hard was it ect?

Any help would be greatly appreciated.

Thanks!

[Max2006]

Originally Posted by TheNewGuy

My cruise control quit working, so I got it looked at and its the cruise control deactivation switch on the master cylinder.

So the question is has anyone changed it out on their own? If so, how hard was it ect?

Any help would be greatly appreciated.

Thanks!

-----------------------------------------------------------------------------------------------------------


I've changed several.


It's the switch near the front bottom of the master cyl. I always drop the drivers side inter fender panel. Easy to reach then. Start to finish is usually a 20-30 minute job.

[TheNewGuy]

Originally Posted by Max2006

-----------------------------------------------------------------------------------------------------------


I've changed several.


It's the switch near the front bottom of the master cyl. I always drop the drivers side inter fender panel. Easy to reach then. Start to finish is usually a 20-30 minute job.

Any idea the part number or a good place to order it online?

[Max2006]

Originally Posted by TheNewGuy

Any idea the part number or a good place to order it online?

------------------------------------------------------------------------------------

might try this ID from parts book but give the dealer your vin number.
Don't remember exact P/N but dealer can pick it out with this and your vin.

9F924
(SW-6349)
Ford

Cruise Control Cutout Switch
With 4 Wheel Disc Brake Hydro-Boost
$41.8