![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
New to me Oil analysis
So I bought my truck and the dealer did an oil change on it before I picked it up. After 3k miles I changed over to synthetic, as well as a tune dpf/delete.
I got that motorcraft oil tested by blackstone, just as a baseline. Here are the results. Truck is a 2008 F250(Job 3), 4x4, auto, XL, 158k miles. One-owner which was a grading/construction business, truck was filthy but overall seems in excellent mechanical condition. Any thoughts on my analysis?
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
I usually go by what they say and since it was only 3k it was premature duration
but the no added fuel is nice on a 6.4 |
|
|||
|
Looks like a good result. What oil are you using?
|
|
|||
|
I went with Rotella T6 after that change, will run it till 165k(about 4k on the oil), just to get my changes rotated to 5 or 10k intervals.
That change will also get sent to blackstone. I was surprised to see minimal fuel dilution with the DPF on and several regens. |
|
|||
|
I have been using rotella T6 also and have had good results from blackstone.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|