|
trailer brakes working, but not, hmmm
Ok so I have the factory TBC and I latched onto my camper and dialed in the brake controller here is what I notice.
It seems everything is working as it should, the brakes seem to engage by use of the pedal and by the manual switch, the led lights up depending on pedal pressure.
On the dash; however, when I click the button to monitor the braking in the guage cluster area it just reads that the gain is 0.0 and the output is blank when I press the pedal or manual slide it doesn't change
Any ideas?
|
10-23-2011, 12:18 AM
Linear Mode
