
So ive had my 08 job 1 since semptember of 10. Absolutely love it, especially since the basic mods have been done to it. The day before I was supposed to leave on a 4 hour trip for the weekend I was washing the truck at work and noticed a small 5" diameter spot on the pavement. Investigated a little and thought it might have been break fluid, felt oily but was basically clear from what I could tell. So the morning of the trip, brought it to my mechanic/ fabricator... We get under the truck, sure enough its a crack in one of the welds on the egr cooler, almost right where it connects to the header. After a few minutes of looking around, out came the tools, a secton of 1" heater hose a section of 3/4" heater hose, an adapter to connect them. After gathering all the parts, the coolant was bypassed from the coolers within 30 minutes and less than 100 in parts and labor

. So I guess the wastegate is going to come sooner then expected. But for anyones info, if your cooler goes, it can be fixed quickly if needed!