Ford Powerstroke Diesel Forum banner

6.0 General Discussion Stickys

56K views 27 replies 18 participants last post by  breathingfiredragon 
#1 · (Edited by Moderator)
6.0 General Discussion Stickys



What to look for when buying a used 6.0
For anyone who needs acronyms for Ford
Link to 6.0 flush pdf General 6.0L Discussion
Write Up: Bullet-Proofing the 6.0L PSD.
Fixing stiction
6.0 Head Stud Part List.
SCT device questions and answers!
6.0 Parts List By FORD/INTERNATIONAL
Banjo bolts and the myths that surround them
Information About SCT Devices
Write Up: Monitoring the 6.0L PSD.
New Preload (torque) Recommendations for 6.0 ARP studs
What to look for when buying used SCT for 6.0
She's under the knife, My build thread. Lots&#039...
Reconditioning a 6.0 Turbo!
Iron scale experiment
https://www.powerstroke.org/forum/g...32-bulletproof-diesel-oil-cooler-install.html
https://www.powerstroke.org/forum/g...e-around-cooling-system-components-degas.html
https://www.powerstroke.org/forum/general-6-0l-discussion/206316-paramedic-saves-6-0l.html
https://www.powerstroke.org/forum/general-6-0l-discussion/229120-how-machine-6-0-a.html
https://www.powerstroke.org/forum/g...3743-started-big-bulletproofing-endeavor.html
https://www.powerstroke.org/forum/g...stock-horsepower-torque-6-0l-powerstroke.html
https://www.powerstroke.org/forum/general-6-0l-discussion/347202-how-determine-head-cracked.html
https://www.powerstroke.org/forum/6-0l-problems-forum/236534-no-start-issue-look-here.html
 
See less See more
#4 ·
Definitely cleaner. The only problem I foresee is that you won't know about new posts in these threads unless you are subscribed to each of them. Am I wrong?
 
#5 ·
Hmmmm... I actually hadn't thought about that. This was the only good way I could come up with to clean things up.
 
#6 ·
How's about making it a sub forum similar to the e99 discussion forum?
 
#7 ·
That's what I was thinking.
 
#8 ·
I actually asked about making a sub forum but was told that there were difficulties setting one up. I will look into it again.
 
#9 ·
IMHO I like it. Things are cleaned up and pretty much know where I left off on each of those threads but hey that's just me
 
#10 ·
Agreed, much cleaner. I like it.
 
#11 ·
I have a 2005 ford excursion 6.0 with an egr delete kit i have been getting a po470 code witch is back pressure sensor. so I replaced it and the map sensor ran great fro 2 months now it is back. i have no power on take off and then it just takes off with full power and runs great. when i shut the truck off and it will start again. can any body help!!! dont know what to do!
 
#12 ·
As a new member and first time 6.0 owner, has any of the experts thought about developing a sticky that tells what all the different acronyms are for parts, sensors and the like are. Maybe include their function, importance, relationship to other components, how to monitor & check, etc..?

It would be a great help for new members and help cut the learning curve down.

I have searched for this but do not find it. If it already exists, I will take the heat.
 
#13 ·
  • Like
Reactions: Tminit
#14 ·
Isn't there a sticky for flushing an oil cooler? I can't find it!

Sent from my SM-J727VPP using Tapatalk
 
#15 ·
No sticky that I recall. It is in @NYC F-350 and @ZMANN 's sigs, IIRC. I always go there.
 
  • Like
Reactions: Patriot and ZMANN
#25 ·

Attachments

#28 ·
This is what I use. It is vehicle specific.



Sent from my iPhone using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top