Wanting an air intake, which one?

Chadderbug · #1 (**permalink**) 10-03-2007, 04:27 PM

Hey there guys i'm new on the site, and i've been looking for an air intake to put on my 6.0. I was wondering which brand and model i should get.

**Raul@Stealth Automotive** · #2 (**permalink**) 10-03-2007, 04:27 PM

the stock intake flows very good as it is but if you really want a intake system AFE is the best... either the sage 1 or stage 2

Blue01F250 · #3 (**permalink**) 10-03-2007, 04:41 PM

+1 on the stock intake - spend your $$$ elsewhere first -- then once you've done the other mods - do the intake if you need to

unless you have the $$$ to spend, then get the AFE Stage 2

**stump0331** · #4 (**permalink**) 10-03-2007, 04:44 PM

yeppers they covered it i aggre with both!!!

**Logan** · #5 (**permalink**) 10-03-2007, 04:45 PM

I also agree with the AFE. There are other good ones out there too.

to the ORG

Blue01F250 · #6 (**permalink**) 10-03-2007, 04:45 PM

And Welcome to the .org!!!!!!!!

westcoaststrokin · #7 (**permalink**) 10-03-2007, 04:49 PM

to the ORG!!

Chadderbug · #8 (**permalink**) 10-03-2007, 04:50 PM

I agree with spending the money on other mods first but right now i'm at school for Caterpillar so I don't have a lot of it yet. I just want her to breath a little better than she is.

**Logan** · #9 (**permalink**) 10-03-2007, 04:52 PM

Open up the exhaust first. You can do that for pretty cheap.

Chadderbug · #10 (**permalink**) 10-03-2007, 04:53 PM

I want to do that too, what do you recommend?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement